SUNGOLDPOWER 5000W Peak 15000W Split Phase Pure Sine Wave Power Inverter, DC 48V AC Input 110V AC Output 120V 240V Converter, With 40A MPPT Solar Charger Controller, 5kW.Good Quality

*SP-PV Series Pure Sine Wave Inverter is a combination of an inverter, AC charger, Mppt solar charger and Auto-transfer switch into one complete system . It is packed with unique features and it is one of the most advanced inverter/chargers in the market today
*Frequency adjust: The frequency of the inverter is arranged by the SW4. The default configuration for 220/230/240VAC inverter is 50Hz, and 60Hz for 100/110/120VAC inverter. While the output freq can be easily changed once a qualified freq is applied to the inverter Protections:AC Input over voltage protection/AC Input low voltage protection,Low battery alarm/High battery alarm,Over temperature protection/Over load protection,Short Circuit protection (1sec after fault),Back feeding protection
*Applicantion:for all the kinds of load: circular saws, drills, grinders, sanders, buffers, weed and hedge trimmers, air compressors.computers, printers, monitors, facsimile machines, scanners. vacuum cleaners, fans, fluorescent and incandescent lights, shavers, sewing machines.coffee makers, blenders, ice markers, toasters.metal halide lamp, high – pressure sodium lamp.television, VCRs, video games, stereos, musical instruments, satellite equipment ect

General specification:

Continuous Output Power :5.0KW

Surge Rating(20s) :15.0KW

Output Waveform :Pure Sine Wave

AC Output Voltage: 120V and 240V

AC Input Voltage:110V

DC Battery Voltage:48Vdc

Solar charger Current:40Amp

AC Battery charger:40±5Amp

Output Voltage Regulation :±10% RMS

Output Frequency :50Hz ± 0.3Hz/60Hz ± 0.3Hz

Typical transfer Time :10ms(Max)

DC Input:

Nominal Input Voltage :48.0Vdc

Minimum Start Voltage :40.0Vdc

Low Battery Alarm :42.0Vdc / 44.0Vdc

Low Battery Shuttle :40.0Vdc / 42.0Vdc

High Voltage Alarm :64.0Vdc

Low Battery voltage get well :62.0Vdc

Idle Consumption-Search Mode :< 25 W when Power Saver On Charger:

Output Voltage: Is dependent upon battery type

Charger Rating :40A

Max Charge Power Rate: 1/3 Rating Power

Battery Initial Voltage for Start Up: 40-62.8V

Over Charge Protection Shutdown :62.8V

Remote Regulate :Yes

Bypass & Protection:

Input Voltage Waveform :Sine wave (Grid or Generator)

Nominal Voltage:110Vac

Nominal Input Frequency :50Hz or 60Hz (Auto detect)

Bypass breaker rating: 40A

Solar Charger controller:

Rated Voltage :48Vdc

Solar Input Voltage Range: 55-100Vdc

Max.PV Open Circuit Array Voltage:105Vdc

Rated Charge Current :40A

Over Charge Disconnection: 59.2V

Over Charge Recovery :54.4V

Over Discharge Disconnection: 43.2 V(default)

Over Discharge Reconnection :49.2V

Mechanical specification:

Inverter Dimensions(L*W*H) :488*415*200mm

Inverter Weight(Solar Chg)KG: 49

Display :LED +LCD

Standard Warranty :1 Year
*SP-PV Series Pure Sine Wave Inverter is a combination of an inverter, AC charger, Mppt solar charger and Auto-transfer switch into one complete system . It’s packed with unique features and it is without doubt one of the so much advanced inverter/chargers out there these days
*Frequency adjust: The frequency of the inverter is arranged by the SW4. The default configuration for 220/230/240VAC inverter is 50Hz, and 60Hz for 100/110/120VAC inverter. At the same time as the output freq may also be easily changed once a qualified freq is applied to the inverter Protections:AC Input over voltage protection/AC Input low voltage protection,Low battery alarm/High battery alarm,Over temperature protection/Over load protection,Short Circuit protection (1sec after fault),Back feeding protection
*Applicantion:for the entire sorts of load: circular saws, drills, grinders, sanders, buffers, weed and hedge trimmers, air compressors.computers, printers, monitors, facsimile machines, scanners. vacuum cleaners, fans, fluorescent and incandescent lights, shavers, sewing machines.coffee makers, blenders, ice markers, toasters.metal halide lamp, high – pressure sodium lamp.tv, VCRs, video games, stereos, musical instruments, satellite equipment ect
*Our inverter is designed with AC priority by default. This implies, when AC input is present, the battery shall be charged first, and the inverter will transfer the input AC to power the burden.The AC Priority and Battery Priority switch is SW4. When you select battery priority, the inverter will inverting from battery regardless of the AC input. Only when the battery voltage is reaches low voltage alarm,the inverter transfers to AC Input, charges battery, and switches back to battery when battery is charged full. This function is basically for wind/solar systems taking utility power as back up
*SP-PV Series Inverter is equipped with a powerful charger of as much as 120Amp (depending on Model). The overload capacity is three hundred% of continuous output for as much as 20 seconds to reliably toughen tools and equipment longer. the max chargecurrent may also be adjusted from 0%-100% by means of a liner switch on the right of the battery type selector. This shall be helpful in case you are the use of our powerful charger on a small capacity battery bank. Fortunately, the lining switch can effectively reduce the max charging current to twenty% of its peak. Choosing “0” within the battery type selector will disable charging function

Reviews

There are no reviews yet.

Be the first to review “SUNGOLDPOWER 5000W Peak 15000W Split Phase Pure Sine Wave Power Inverter, DC 48V AC Input 110V AC Output 120V 240V Converter, With 40A MPPT Solar Charger Controller, 5kW.Good Quality”

Your email address will not be published. Required fields are marked *