Lensun® 100W 12V Semi-Flexible Fiberglass Back Sheet Solar Panel Kit with 10A 12V/24V Solar Charge Regulator and 5m Cables with MC4 Connector,Sunpower Back Contact Solar Cell for 12V Charge Battery on Boats Caravans Motorhome Yatch RV

The first layer is ETFE materials which import from Japan, this materials can absorb sunlight and can not reflect sunlight. Other brands flexible solar panel use PET which reflective very serious,it cause the solar panel’s output reduce.
Fiberglass back sheet is lighter and softer than aluminium, with a better combination of ETFE film than aluminium and plastic sheet.
Only 2.5mm thin, lightweight, walkable,extremely powerful and resistant to the harsh operating conditions of the marine environment. Including four metal reinforced mounting holes for easy installation.

The fiberglass back sheet is lighter and softer than aluminium, with a greater combination of ETFE film than aluminium and plastic back sheet solar panel.

The first layer is ETFE materials which import from Japan, this materials can soak up daylight and cannot reflect light.

Made of SunPower Back Contact Solar cell,Very best Solar cell out there,22% efficiency.

Highly efficient monocrystalline cells

Laminated for weather resistance

laminated with oxide aluminum + ETFE + Silicon cell + EVA + Tedlar

Size: 1100x570x2.5mm,43.3×22.4×0.1inch

Pmax:100w

Open circuit voltage(Voc): 20.7V

Optimum power voltage(VMP):18V

Short circuit current(Isc): 6.11A

Max operating current(IMP):5.56 A

torrence:+_5%

Maximum system voltage: 500V

Weight: 2.71kgs(5.97lbs)

10A 12V/24V Solar Charge Regulator/ Controller

pls note, this regulator is household sort, there isn’t”time set” serve as.

PANEL OF CONTROLLER:

Temp: Temprature probe

Charge: Photo-electricity charging indicating(LED in GREEN)

Fault: Fault indicating(LED in RED)

Power: Load indicating (LED in GREEN) green LED on method there’s output of the burden

Mode: battery capacity percent indicating

Set: load switch

Two 5m MC4 Solar Cable with 1 Male Connector & 1 Female Connector

This cable has a male connector on one end and a feminine connector at the other end.

Use them to increase module output cables or cut anyplace along the wire to acquire the wanted length of female and male cable to run from string of modules to a combiner box or to an extended cable.

Packing:

1. One 100W 12V flexible solar panel

2. One 10A 12V/24V Solar Regulator

3. Two 5m Cables with MC4 Connector
The primary layer is ETFE materials which import from Japan, this materials can soak up daylight and cannot reflect daylight. Other brands flexible solar panel use PET which reflective very serious,it result in the solar panel’s output cut back.
Fiberglass back sheet is lighter and softer than aluminium, with a greater combination of ETFE film than aluminium and plastic sheet.
Most effective 2.5mm skinny, lightweight, walkable,extremely tough and immune to the cruel operating conditions of the marine environment. Including four metal strengthened mounting holes for simple installation.
10A 12V/24V Solar Charger Controller Auto is household sort, there isn’t”time set” serve as.
Two 5m Cable with MC4 Connectors to increase cable to Regulator or Battery

Brand

EAN

EANList

ItemDimensions

Label

Manufacturer

PackageQuantity

ProductGroup

Publisher

Studio

UPC

UPCList

Reviews

There are no reviews yet.

Be the first to review “Lensun® 100W 12V Semi-Flexible Fiberglass Back Sheet Solar Panel Kit with 10A 12V/24V Solar Charge Regulator and 5m Cables with MC4 Connector,Sunpower Back Contact Solar Cell for 12V Charge Battery on Boats Caravans Motorhome Yatch RV”

Your email address will not be published. Required fields are marked *