Cotek SD2500-112

Rating Power: 2500 Watts Peak Power (For 3 Seconds): 3000 Watts Surge Power (For < .2 Seconds): 4000 Watts Waveform: Pure Sine Wave Potency: 88% Output Voltage (At rated Volts DC): one hundred/one hundred ten/115/one hundred twenty Volts AC +-3% Selectable Output Frequency: 50/60 Hz Twin GFCI retailers and terminal block for hardwiring Total Harmonic Distortion (THD): < 3% (At rated / Volts DC, linear load) DC Voltage: 12 Volts DC Voltage Vary: 10~sixteen Volts DC No load power Consumption: At 12 Volts DC On Mode @ Save Mode: 0.9 Amps On Mode @ No Load Mode: < 2.9 Amps Fuse: 40 Amps x 9 AC Vary: one hundred/one hundred ten/115/one hundred twenty Volts AC +-12.five% Frequency Selectable: 50/60 Hz Synchronous Frequency: forty seven-fifty seven / fifty three-sixty three Circuit Breaker: 35 Amps Transfer Switch: Optional STS Mode: < 4ms | Usual ATS: Inverter to utility AC: 8~10ms Cooling: Load and thermal Regulate fan. Working Temperature: -four° to one hundred forty° F (-20° to 60° C) Storage Temperature: -forty° to 158° F (-forty° to 70° C) Safety Standards: Certified UL 458 EMC Standards: Certified FCC Elegance B LED Indicator: Input voltage level, output load, and faulty standing Remote Regulate: CR-6, CR-8, and CR-10 Dimensions (WxHxD): 11.four" x 5.1" x 17.2" (283mm x 128.4mm x 436mm) Weight: 17.6 lbs (8 kgs) Parallel redundancy design for power enlargement More than one commercial applications that create power systems Automatic master mechanism to get rid of single point Failure and optimize reliability Built-in ATS and AC circuit breaker Optional STS Module, transfer time not up to 4ms RS-232 communication Input and Output absolutely isolation Output voltage and gear saving mode selectable BAT.Low Alarm +-3%: 10.5 Volts DC BAT.Low Close-down +-3%: 10 Volts DC BAT.Low Restart +-3%: 12.5 Volts DC BAT.Top Alarm +-3%: 15.5 Volts DC BAT.Top Close-down +-3%: 16 Volts DC BAT.Top Restart +-3%: 15 Volts DC Input protection: Reverse Polarity (Fuse) / Beneath voltage/Over Output protection: Short Circuit/Overload/Over Temperature/Over Voltage Safety Standards Certified: UL, FCC, CE, E13 [amz_corss_sell asin="B012DXMJRI"]


There are no reviews yet.

Be the first to review “Cotek SD2500-112”

Your email address will not be published. Required fields are marked *